Skip to main content


Issue: Genie Industries has found that wed debris in the boom tubes could lead to premature and excessive wear of the upper wear pads. This excessive wear can lead to potential damage to the boom tubes and could cause the platforms to drop.

Required Action: Locate all affected machines referenced below. Order the appropriate kit (listed below) to replace the wear pads on your machine. (Order instructions are listed below.)

Affected Machines
Model Kit Part Number
SX 150 1280093GT
SX-180 1280092GT

Please complete this as soon as possible. Part replacement must be done no later than 30 days from receipt of the kit.

Models and Serial Numbers Affected

  • SX-150: SX15015H-101 to 161
  • SX15016H-162 to 228
  • SX150H-500 to 501
  • SX-180: SX18014-101 to 196
  • SX18015-197 to 313
  • SX18016-314 to 317
  • SX18016H-318 to 360
  • SX180H-600 to 602

Continued Use Instructions

All machine operators and users must be notified of these continued use requirements. The affected machines may remain in service until this Safety Notice is completed, provided that inspection for wear pads is included as part of the pre-operation inspections outlined in the machine’s Operator’s Manual.

Order Instructions

Machine owners with a valid Genie account can contact the Terex AWP Parts Department to place an order through one of the following:

Genie Website
Fax: 1-888-274-6192
Phone: 1-800-536-1800

Machine owners without a valid Genie account can contact their nearest Terex AWP dealership or Terex AWP Service Centers for assistance. Search for your nearest Terex AWP dealership by visiting our website.

Comments are closed.